Products

17-SCTL6B17SR

Specification.pdf

 

Specification

 

 

Touchscreen Parameter

Touch Screen

Dimensions(mm)

External Dimensions

382×312

Display Area

346×278

Glass Thickness

6

Ratio(Length Vs Width)

4:3

Material

Pure   Glass

Light   Transmission

90

Anti-Vandal

Impact Resistance: Strength can meet IEC60950   ball drop test (0.5 kg, 50 mm diameter ball

dropped   from height of 1.3 m)

Surface   Hardness

Moh’s   hardness rating of 7

Electrical   Parameter

Voltage

+12VDC,normal   (+11V to +13VDC)

Current

60mA, typical, supply must be capable of   sourcing, 250mA, minimum

Power

Average power consumption is 0.72W at +12VDC,

Noise   parameter

Total noise and ripple requirement must be   less than 50 mV (p-p) for frequencies above 1

MHz

Interface

EIA 232E (Serial RS-232), DCE configuration. 8   Data Bits, 1 Stop Bit, No Parity, Full Duplex

Baud   rate: 9600

USB1.1

Touch Parameter

Resolution

4096×4096

Conversion   Time

Approximately 10.4 ms per coordinate set   (including transmitting time)

Touch   Activation Force

80g

Environment Parameter


Touchscreen

Controller

Operating   Temperature

-20+50

0+65

Storage   Temperature

-40+70

-20+85

Operating   Humidity

40 at 90% RH, noncondensing


Operating   Altitude

3000m


Reliability

MTBF is greater than 300,000 hours per   MIL-HDBK-217-F2 using the parts stress

calculation method for ground benign   environment with an ambient temperature of 25

ESD

Per EN 61000-4-2: Contact discharge 4kV, air   discharge 8kV

Flammability

The printed circuit board substrate is rated   with 94V0

ROHS

The Touch System including TouchScreen,   Controller and Cable is ROHS compliant

Agency   Approval

UL

Systems incorporating GT touchscreens,   controllers, and cables have been approved for CE

marking

Systems incorporating GT touchscreens,   controllers, and cables have been approved to

FCC   Class A compliance

Controller   Characteristic

Type

The touchscreen controller of GeneralTouch   Company is ST6001SU

Construction

Multi-layer surface-mount design with internal   ground plane for EMI suppression

Dimensions

85×62×12mm


No.6 Keyuan South Road, High-Tech Zone,Chengdu, China 028-85124114
© 2017 General Touch. All Rights Reserved.