Products

19-SCTL6B19PSIR

Specification.pdf

Specification

Touchscreen Parameter

Touch Screen

Dimensions(mm)

External   Dimensions

442×364

Display   Area

380×302

Glass   Thickness

6

Ratio(Length   Vs Width)

4:3

Material

Pure   Glass

Light   Transmission

90

Dustproof

IP6X

Anti-Vandal

Impact   Resistance: Strength can meet IEC60950 ball drop test (0.5 kg, 50 mm diameter   ball

dropped   from height of 1.3 m)

Surface   Hardness

Moh’s   hardness rating of 7

Electrical   Parameter

Voltage

+12VDC,normal   (+11V to +13VDC)

Current

60mA,   typical, supply must be capable of sourcing, 250mA, minimum

Power

Average   power consumption is 0.72W at +12VDC,

Noise   parameter

Total   noise and ripple requirement must be less than 50 mV (p-p) for frequencies   above 1

MHz

Interface

EIA   232E (Serial RS-232), DCE configuration. 8 Data Bits, 1 Stop Bit, No Parity,   Full Duplex

Baud   rate: 9600

USB1.1

Touch Parameter

Resolution

4096×4096

Conversion   Time

Approximately   10.4 ms per coordinate set (including transmitting time)

Touch   Activation Force

80g

Environment Parameter


Touchscreen

Controller

Operating   Temperature

-20+50

0+65

Storage   Temperature

-40+70

-20+85

Operating   Humidity

40 at 90% RH, noncondensing

Operating   Altitude

3000m

Reliability

MTBF   is greater than 300,000 hours per MIL-HDBK-217-F2 using the parts stress

calculation method for ground benign   environment with an ambient temperature of 25

ESD

Per   EN 61000-4-2: Contact discharge 4kV, air discharge 8kV

Flammability

The   printed circuit board substrate is rated with 94V0

ROHS

The   Touch System including TouchScreen, Controller and Cable is ROHS compliant

Agency   Approval

UL

Systems   incorporating GT touchscreens, controllers, and cables have been approved for   CE marking

Systems   incorporating GT touchscreens, controllers, and cables have been approved to

FCC   Class A compliance

Controller   Characteristic

Type

The   touchscreen controller of GeneralTouch Company is ST6001SU

Construction

Multi-layer   surface-mount design with internal ground plane for EMI suppression

Dimensions

85×62×12mm

No.6 Keyuan South Road, High-Tech Zone,Chengdu, China 028-85124114
© 2017 General Touch. All Rights Reserved.