Touch Active Area
Gloss :80± 15
(Anti-Glare touchscreen, Optional)
(“A” in touchscreen’s model No. represents Anti-Glare)
IP5X（Touch Active Area）
(DustProof touchscreen, Optional)
(“P” in touchscreen’s model No. represents Dustproof)
IP54（Touch Active Area）
(WaterProof touchscreen, Optional)
(“W” in touchscreen’s model No. represents Waterproof)
Impact Resistance: Can meet IEC60950 ball drop test (0.5 kg,
(Impact Resistance, Optional)
50mm diameter ball dropped from height of 1.3 m)
90% with glass(depending on anti-reflective surface coating)
Mohs' hardness rating of 7
Supply Voltage and Current
+5VDC,normal (+4.75V to +5.25VDC).
Less than 300mA, typical at +5VDC, Average power consumption is less than1.5W , typical
Supply must be capable of sourcing 500mA, minimum.
Total noise and ripple requirement must be less than150 mV (p-p) for frequencies below 1 MHz.， and less than 50 mV (p-p) for frequencies above 1 MHz.
USB 2.0(full speed)
32767 X 32767
One or Multi-points touch (≤10 points，need driver).
<1.5mm(centre area)，<2.5mm(marginal area).
Finger or any other opaque stylus .
Less than or equal to 10ms per coordinate set (including transmitting time) .
Minimum Stylus Size
Operating Temperature: -20℃～+70℃
Storage Temperature: -20℃～+70℃
90% RH at 40°C, noncondensing.
MTBF is greater than 50,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for ground benign environment with an ambient temperature of 25℃.
Per EN 61000-4-2: Contact discharge 4kV, air discharge 8KV.
The printed circuit board substrate is rated with 94V0.
The Touch System including TouchScreen and Cable is ROHS compliant.