Touch Active Area
(Anti-Glare touchscreen, Optional)
Gloss :80± 15
(“A” in touchscreen’s model No. represents Anti-Glare)
(DustProof touchscreen, Optional)
IP5X（Touch Active Area）
(“P” in touchscreen’s model No. represents Dustproof)
(WaterProof touchscreen, Optional)
IP54（Touch Active Area）
(“W” in touchscreen’s model No. represents Waterproof)
(Impact Resistance, Optional)
Impact Resistance: Can meet IEC60950 ball drop test (0.5 kg,50mm diameter ball dropped from height of 1.3 m)
(“S” in touchscreen’s model No. represents Safety)
90% with glass(depending on anti-reflective surface coating)
Mohs' hardness rating of 7
Supply Voltage and Current
+5VDC,normal (+4.75V to +5.25VDC).
Less than 460mA, typical at +5VDC, Average power consumption is less than2.3W , typical
Supply must be capable of sourcing 1A, minimum.
Total noise and ripple requirement must be less than150 mV (p-p) for frequencies below 1 MHz.， and less than 50 mV (p-p) for frequencies above 1 MHz.
USB 2.0(full speed)
32767 X 32767
Single or Multi touch (≤10 points).
<1.5mm(centre area)，<2.5mm(marginal area).
Finger or any other opaque stylus.
Less than or equal to 12ms per coordinate set (including transmitting time) .
Minimum Stylus Size
Operating Temperature: 0℃～+60℃
Storage Temperature: -10℃～+70℃
90% RH at 40°C, noncondensing.
MTBF is greater than 50,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for ground benign environment with an ambient temperature of 25℃.
Per EN 61000-4-2: Contact discharge 4kV, air discharge 8KV.
The printed circuit board substrate is rated with 94V0.
The Touch System including TouchScreen and Cable is ROHS compliant.